The Best Way to Paste Background at the corners: Directions, gluing outer, inner corner, docking

Step by step directions for gluing inner corners

After completing, the main problem can be uneven walls as well as the consequent folds on the wallpaper. It’s also essential to take into consideration that if the walls are crooked, the joints of background canvases can invisibly.

After gluing the last one in front of the inner corner of the fabric should measure the remaining distance. It is measured from the edge of the pasted cloth to the adjacent wall, so the resulting amount is inserted 10-15 millimeters. When the walls are extremely curved, the additional figure may be more.

Cut a strip equal to the gidpola.ru resultant figure, taking into account the allowance. The surfaces are treated with glue. Based on the form of coat it could be precisely the wall or the surfaces.

The strip has been glued individually with the cut side to the wallsocket. The wallpaper should go on the opposite airplane.

If the glued background is wrinkled, you need to make several smallish cuts perpendicular to the springs.

Level or incline on the adjacent wall is a vertical lineup. The distance in the corner is equal to the diameter of the former cut strip, never including additions.

The surfaces have been smeared with adhesive, and then the coat is glued to the wall with the flat side towards the marked line. The cut goes on the adjoining wall.

Protruding corner should be pasted by analogy using the interior, however there are little differences, which also need to be taken into consideration when working.

Measured the space remaining in the glued background to the adjoining wall. Insert 20-25 millimeters to the captured figure.

A section is cut away, taking into account the additional 20-25 millimeters.

Before gluing, the surfaces have been treated with glue.

The even edge has to be glued to the background already fixed on the walls, the own cut “extends” to the next plane. If necessary, small cuts are made in the place of going to the other wallpaper, smoothed and pushed into the wall.

Draw a vertical strip onto the adjacent wall at a distance of just glued cut strip and 6-10 millimeters.

After applying the adhesive, the strip is then put on the wall with its flat side to the marked line, going over the edge of this glued strip.

The joints are smeared with glue and ironed using a rollercoaster. After that, the top layer is cut across the ruler and the two layers are combined together.